GT-13P Plastic Low Profile Car Service Ramp

GT-13P-car-ramp-(1)

Product Description

Item
Low Profile Car Service Ramp
Model
GT-13P
Material
Plastic
Dimensions (1 piece)
700 x 200 x 76 mm
Weight(1 piece)
3.5 lbs (1.6 kg)
Load Capacity (2 pieces)
3T
Load Angle
8.6°
Lift Height
64 mm
Color
Black, Yellow, Red, or customized
Compatible Vehicles Lowered cars

More information

【8.6° Loading Angle】 Make these car service ramps easier and safer to load low-profile cars without touching the front bumper.
【2.5" Lifting Height】 Lifting low-profile cars for 2.5 inches higher, make sure you can put the hydraulic floor jack under the lowered chassis cars.
【6600LBS Load Capacity】 New PP material makes the car service ramp lightweight (3.5 LBS/each) but high-strength, with load capacity up to 3 Ton (6600 lbs/pair).
【Curved Top and Bulged End】 Prevent driving from crossing the end of car service ramps and stop the vehicles from sliding down.
【Mesh Channels Design】 Anti-slip and prevent accumulated oil, water, and debris, making it more durable and lightweight.
【Ramp Overall Size】 L 27.4" x W 7.9" x H 3" (each). 2PCS/Set

Detailed Images

How to make the low rider run the car ramp without hitting the bumper:

(H)= Front bumper is higher than ground

(L) = Length of the front ride, the distance between the front wheel and ground contact and the front bumper end.

a.If H>78mm, it can be used.

b. 68mm

c. 68mm 590mm may not be able to drive without touching the front bumper.

d. For H<68mm, you will need the following work (ex: H = 60mm)

Calculate the desired front ride length.

1.Calculation of Bumper Length (L)=H/tan0(8.6)≈60mm/0.15≈400mm

2.Measure the length of the bumper (L)

Can be used if L <15.7 inches (400 mm).

L>400mm may not be able to drive without touching the front bumper.

 

Notice:
This car ramp is designed to help the chassis raise the lower vehicle to keep the hydraulic jack under the vehicle. If your car's chassis is at normal height and you just want to use your car's ramps for oil changes or maintenance, then you can choose from the products below:

 

  • GT-14P Ramp (4)

    GT-14P Plastic Widen High Lift Car Service Ramp

    Dimensions (1 piece): 905 x 330 x 215 mm
    Weight (1 piece): 10.9 lbs (4.7 kg)
    Load Capacity (2 pieces) : 7T
    Load Angle: 17°
    GT-14P Normal Height Car Ramp can help cars to lift tires to 170 mm height. This car ramp allows you to maintain your car without a hydraulic jack.

  • Car Ramps GT-15P (1)

    GT-15P Plastic High Lift Car Service Ramp

    Dimensions (1 piece): 905 x 305 x 215 mm
    Weight (1 piece): 8.8 lbs (4 kg)
    Load Capacity (2 pieces) : 7T
    Load Angle: 17°
    GT-15P Normal Height Car Ramp can help cars to lift tires to 170 mm height. This car ramp allows you to maintain your car without a hydraulic jack.

  • Steel-Service-Ramp-(11)

    GT-14M Steel Car Service Ramp

    Dimensions (1 piece): 850 x 325 x 275 mm
    Weight (1 piece): 14.7lbs (6.7 kg)
    Load Capacity (2 pieces) : 4T
    GT-14M Steel Car Service Ramp with Powder Paint. Can help cars to lift tires to 240 mm height. Applied for Low profile race cars or the other smaller vehicle for vehicle maintenance or presentation.

  • Hydraulic Ramp

    GT-14MH Steel Hydraulic Car Service Ramp

    Dimensions (1 piece): 1150 x 325 x 295 mm
    Weight (1 piece): 49.5lbs (20.5 kg)
    Load Capacity (2 pieces) : 5T
    GT-14MH Steel Hydraulic Car Service Ramp with Powder Paint. Can help cars to lift tires to 240-370 mm height.